Microcircuitos is committed to clean energy
We have been in the market for over 40 years, positioning ourselves as one of the largest manufacturers and suppliers of printed circuits, but now we are committed to photovoltaic solar energy. We produce renewable electricity obtained mainly through solar radiation, allowing us to generate energy on a large scale using 102 solar panels of 325 kWp and a grid-tied inverter, located on the roof of our headquarters, which represents an annual energy savings of 1,295.64 kWh/kWp for the company, reflected in a coefficient of 83.1%. The company aims to reduce grid power consumption while achieving greater energy efficiency.
According to the installed capacity, environmental factors can be determined by accredited institutions worldwide.
According to equivalent data based on calculations from the Rocky Mountain Institute, the following environmental equivalents can be determined:
Thanks to the use of renewable energy
In microcircuits, we do not generate constant chemical waste, thanks to the processes we know to separate solid particles from the chemicals, allowing us to only regenerate and reuse the solution.
It can be determined that the lifetime of greenhouse gases that would have been generated if non-clean energy sources had been used. The recorded amounts are based on state averages from the U.S. Department of Energy (DOE) or country averages from the International Energy Agency (IEA) calculated from the kilowatt-hours generated during the system's lifetime. If the system monitoring is a post-adaptation, there is a possibility that not all energy production is taken into account.
